NCX Series Single Wire
Designed for demanding applications such as SiC and Sapphire, the NCX Series delivers higher precision, higher speeds, and production-grade performance.
FEATURES
- Wire speeds up to 25 m/s for maximum throughput
- Operator-friendly touchscreen HMI allows for simple programming and storage of 30 process recipes while still prioritizing ease of use
- PLC-controlled tension system with load-cell feedback ensures precise tension across wire sizes
- Multi-wrap capability enables multiple slices per pass, significantly increasing output
- Supports up to 5 wraps within a 10 mm guide
- Standard indexing table, with optional high-precision encoder upgrade
BENEFITS
- Ideal for cutting hard and brittle materials such as: silicon, silicon carbide, quartz, sapphire, fused silicon glass, ceramics, graphite, germanium, etc.
- Minimal kerf loss for faster cuts and improved surface finish
- High-end controls ensures process stability through the duration of a cut
| TECHNICAL SPECIFICATION | NCX200 |
|---|---|
| Cut Envelope | 200 mm x 200 mm x 200 mm |
| Saw Dimensions | W: 1075 mm / 42.32" H: 2040 mm / 80.31" D: 930 mm / 36.61" |
| Saw Weight (Max) | 567 Kg / 1250 Lbs |
| Power Requirements (V/f/A/ph) | 480 V / 50-60 Hz 20 Amp 3 phase |
| Wire Speed (m/s) | Max: 25 m/s |
| Tension | Max 40 N |
| Cutting Fluid Tank Capacity | 64 Liter / 17 Gallon |
| Indexing Table Accuracy (mm) | Standard: ±0.050 | High-Accuracy Upgrade: ±0.003 |
NCS Series Single Wire
Engineered for reliability, ease of use, and exceptional cutting efficiency across a broad range of materials.
FEATURES
- New capstan design extends wire life and reduces overall cost of ownership
- High wire speeds up to 20 m/s (with optional high speed upgrade)
- Supports diamond wire diameters from 120 μm to 300 μm
- Touchscreen HMI with storage for up to 30 cutting recipes
- Standard tension levels of 50 N and 60 N
- Optional high-tension capability up to 150 N
- Dual wire-break detection for enhanced process safety
BENEFITS
- Ideal for soft to moderately hard materials (harder materials recommended for NCX)
- Optimized design enables rapid wire replacement, reducing downtime and improving throughput
- Minimal kerf loss for improved surface quality and faster cutting
| TECHNICAL SPECIFICATION | NCS100 and NCS200 |
|---|---|
| Cut Envelope | NCS100: 100 mm W x 200 mm H x 200 mm D NCS200: 200 mm W x 200 mm H x 200 mm D |
| Saw Dimensions | 1075 mm/42.32" W x 2040 mm 80.31" H x 835 mm / 32.87" D |
| Saw Weight | 544 Kg / 1200 Lbs |
| Power Requirements (V/F/A/PH) | Std Tension: 208–230/50-60 hz/20/Single High Tension: 208–230/50-60 hz/20/3 Phase |
| Wire Speed (m/s) | Standard: Max 12 m/sec High Tension Upgrade: Max 12 m/sec |
| Tension | Standard: Max 50N/60N High Tension: Max 150N |
| Cutting Fluid Tank Capacity | 64 Liter / 17 Gallon |
| Indexing Table Accuracy (mm) | Standard: ±0.050 Optional: ±0.003 |
| Compressed Air | 100psi |
Tilt and Rotation Table
- Can be used on the NCS and RTD diamond wire saws
- Position your slicing plane with an accuracy of 0.01 degree (40 arcsec)
- Accurate, repeatable, and robust
Slice quartz and fused silica
- Efficient cutting with speed, precision and material savings
Our products are designed and manufactured in North America.